Important Tips for Maintaining Your Scooter Bearings

It is essential to remember that the scooter bearing happens to be an important component of the scooter. However, we often tend to ignore this particular component. The bearings can affect the overall performance of the scooter over time because of so much abuse absorbed by them. Your scooter bearings will become more eroded if you ride your scooter for a longer period. In this case, you have no other choice but to replace the bearings for maintaining the performance of your scooter.

However, it will be possible to avoid replacing the bearings by maintaining them properly. But the question that might arise in your mind is how to get the job done. To make things simplified for you, here we have mentioned some maintenance guidelines for your scooter bearing.

It will be feasible to increase the longevity of the bearings by cleaning them and oiling them regularly. On the other hand, there will be a reduction in their lifespan if they are used or stored in a filthy and damp environment.

Maintaining the bearings

1. Use a brush to clean the external surfaces after removing them from the wheel. Make it a point to clean the C-clips and seals if they come along with the scooter. Following this, make sure to take out the seals with the help of a Stanley knife or a drawing pin from the bearing. Take your preferred cleansing agent. Agitate the bearings for several minutes after placing them in a container having the cleansing agent inside it. Get rid of the removing washing chemical after spinning the bearings once you have retrieved them from the box. At this point, it will be a good idea to utilize grease or oil on the bearings. However, don’t apply much grease since it might collect dirt. Insert the bearings back to the wheels of the scooter once you completed the cleaning process.

2. Apply any proper lubricant to the bearings without getting rid of the wheels. In this way, it will be possible to extend the lifespan of the hearings plus minimize damage to the Axles and Bolts as well. One positive aspect of this technique is that there is no need for you to apply the Thread locking solution once again or even re-tighten the Axles constantly. However, you cannot avoid oils on the wheels by using this technique.

If you own a dirt bike, it will also be imperative for you to maintain the dirt bike accessories as well.

3. Remove the bearings after using a bearing puller once you have removed the wheels. Make it a point that the appropriate bearing spacers are used for the wheels which will be inspected for any damage.

4. It is a fact that scooter bearings happen to be consumable components, and you have to replace them very soon if they are not maintained properly. If the bearings are inexpensive, you need to maintain them more frequently.

Final thoughts

If you don’t like to replace the bearings for your scooter, then make sure to maintain them from time to time. You can do this by cleaning and lubricating the bearings once in a while to get the best results.

Leave a Reply

Your email address will not be published.